Scheduling A Reset Within A Specified Amount Of Time - Cisco WS-C2950SX-48-SI Configuration Manual

Catalyst 4500 series switches
Hide thumbs Also See for WS-C2950SX-48-SI:
Table of Contents

Advertisement

Chapter 27
Administering the Switch
Note
The maximum scheduled reset time is 24 days.
To schedule a reset at a specific time, perform this task in privileged mode:
Task
Step 1
Schedule the reset time at a specific time.
Step 2
Verify the scheduled reset.
This example shows how to schedule a reset at a specific time:
Console> (enable) reset at 20:00
Reset scheduled at 20:00:00, Sat Aug 18 2001.
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 20:00:00, Sat Aug 18 2001 (in 0 day 5 hours 40 minutes).
Console> (enable)
This example shows how to schedule a reset at a specific time and include a reason for the reset:
Console> (enable) reset at 23:00 08/18 Software upgrade to 5.3(1)
Reset scheduled at 23:00:00, Sat Aug 18 2001.
Reset reason: Software upgrade to 6.3(1).
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 23:00:00, Sat Aug 18 2001 (in 0 day 8 hours 39 minutes).
Console> (enable)
This example shows how to schedule a reset with a minimum of downtime:
Console> (enable) reset mindown at 23:00 08/18 Software upgrade to 6.3(1)
Reset scheduled at 23:00:00, Sat Aug 18 2001.
Reset reason: Software upgrade to 6.3(1).
Proceed with scheduled reset? (y/n) [n]? y
Reset mindown scheduled for 23:00:00, Sat Aug 18 2001 (in 0 day 8 hours 39 minutes).
Console> (enable)

Scheduling a Reset Within a Specified Amount of Time

You can schedule a reset within a specified time with the reset in command. For instance, if the current
system time is 9:00 a.m. and the reset is scheduled to take place in one hour, the scheduled reset will
take place at 10:00 a.m. If you or NTP advances the system clock to 10:00 a.m., the reset will take place
at 11:00 a.m. If the clock is advanced ahead of the scheduled reset time, the reset will take place
5 minutes after the command is issued.
To schedule a reset within a specified time, perform this task in privileged mode:
Task
Step 1
Schedule the reset time within a specific amount of time. reset [mindown] in [hh] {mm} [reason]
Step 2
Verify that the scheduled reset time is correct.
Note
The minimum downtime argument is valid only if the system has a redundant supervisor engine.
78-15486-01
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
Command
reset [mindown] at {hh:mm} [mm/dd] [reason]
show reset
Command
show reset
Scheduling a System Reset
Release 8.1
27-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents