Configuring Static Ports - Cisco WS-C2950SX-48-SI Configuration Manual

Configuring VMPS
To reconfirm the dynamic port VLAN membership assignments, perform this task in privileged mode:
Task
Step 1
Reconfirm dynamic port VLAN membership.
Step 2
Verify the dynamic VLAN reconfirmation status.
This example shows how to reconfirm dynamic port VLAN membership assignments:
Console> (enable) reconfirm vmps
reconfirm process started
Use 'show dvlan statistics' to see reconfirm status
Console> (enable)
To download the VMPS database manually and refresh the existing VMPS database, perform this task
in privileged mode. If you are updating the VMPS database, you need to download the VMPS database
to the primary and backup VMPS servers.
Task
Step 1 Download the VMPS database from the TFTP server, or
specify a different VMPS database configuration file.
Step 2 Verify the VMPS database configuration file.
To disable VMPS on the VMPS server, perform this task in privileged mode. When you disable the
VMPS server, any active dynamic ports in the network will retain the VLAN until the host releases the
VLAN or disconnects from the port.
Task
Step 1 Disable VMPS.
Step 2
Verify that VMPS is disabled.
This example shows how to disable VMPS on the switch:
Console> (enable) set vmps state disable
All the VMPS configuration information will be lost and the resources released on disable.
Do you want to continue (y/n[n]): y
Vlan Membership Policy Server disabled.
Console> (enable)

Configuring Static Ports

To return a port to the static mode, perform this task in privileged mode:
Task
Step 1
Configure to static mode.
Step 2
Verify the static port assignments.
This example shows how to return port 1 on module 3 to static mode:
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
12-10
Chapter 12 Configuring Dynamic VLAN Membership with VMPS
Command
reconfirm vmps
show dvlan statistics
Command
download vmps
show vmps
Command
set vmps state disable
show vmps
Command
set port membership mod_num/port_num static
show port [mod_num[/port_num]]
—
Release 8.1
78-15486-01