Clearing The Login Banner; Enabling Or Disabling The "Cisco Systems Console" Telnet Login Banner - Cisco WS-C2950SX-48-SI Configuration Manual

Chapter 27 Administering the Switch
This example shows how to set the login banner for the switch. The # symbol indicates the beginning
and ending delimiter, but you can use any character for the delimiter.
Console> (enable) set banner motd #
Welcome to the Catalyst 4012 Switch!
Unauthorized access prohibited.
Contact sysadmin@corp.com for access.
#
MOTD banner set
Console> (enable)

Clearing the Login Banner

To clear the login banner, perform this task in privileged mode:
Task
Clear the message of the day.
This example shows how to clear the login banner:
Console> (enable) set banner motd ##
MOTD banner cleared
Console> (enable)
Enabling or Disabling the "Cisco Systems Console" Telnet Login
Banner
By default, the Cisco Systems Console Telnet login banner is enabled.
To enable or disable the "Cisco Systems Console" Telnet login banner, perform this task in privileged
mode:
Task
Step 1
Display or suppress the Cisco Systems Console
Telnet login banner.
Step 2
Display the Cisco Systems Console Telnet login
banner setting.
This example shows how to enable the Cisco Systems Console Telnet login banner:
Console> (enable) set banner telnet enable
Cisco Systems Console banner will be printed at telnet.
Console> (enable)
This example shows how to disable the Cisco Systems Console Telnet login banner:
Console> (enable) set banner telnet disable
Cisco Systems Console banner will not be printed at telnet.
Console> (enable)
78-15486-01
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide

Enabling or Disabling the "Cisco Systems Console" Telnet Login Banner

Command
set banner motd cc
Command
set banner telnet {enable | disable}
show banner
—
Release 8.1
27-5