Show Platform Spanning-Tree Synchronization - Cisco WS-C2350-48TD-S Command Reference Manual

show platform spanning-tree synchronization

show platform spanning-tree synchronization
Use the show platform spanning-tree synchronization privileged EXEC command to display
platform-dependent spanning-tree synchronization information.
Syntax Description detail
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2350 Switch Command Reference
C-24
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |
include} expression]
Optional) Display detailed spanning-tree information.
(Optional) Display VLAN switch spanning-tree information for the specified
VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Catalyst 2350 Show Platform Commands
OL-19055-01