Send Start Speed - Canon imageCLASS MF5850dn Basic Operation Manual

Send Start Speed

Send Start Speed

This function enables you to change the send start speeds, which is useful when there is
difficulty initiating the sending of a document. The default setting is <33600bps>.
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
M E N U
1 0 . S Y S T E M
If the System Manager ID and System Password
have been set, enter the System Manager ID and
System Password using
then press [Log In/Out].
3
Press or
<COMMUNICATIONS>, then press [OK].
S Y S T E M S E T T I N G S
6 . C O M M U N I C A T I O N S
4
Press or
SETTINGS>, then press [OK].
C O M M U N I C A T I O N S
3 . F A X S E T T I N G S
5
Press or
SPEED>, then press [OK].
F A X S E T T I N G S
1 . T X S T A R T
to select <SYSTEM
S E T T I N G S
– [numeric keys],
to select
to select <FAX
to select <TX START
S P E E D
6
Press or
speed, then press [OK].
T X S T A R T
If your document transmission is slow in
starting, this may mean that the telephone lines
in your area are in poor condition. Select a
slower speed. You can select <33600bps>,
<14400bps>, <9600bps>, <7200bps>,
<4800bps>, or <2400bps>.
7
Press [Stop/Reset] to return to the
standby mode.
to select the desired start
S P E E D
3 3 6 0 0 b p s
6-43