Important Safety Instructions; Installation - Canon imageCLASS MF5850dn Basic Operation Manual

Important Safety Instructions

Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the
machine.
As these instructions are intended to prevent injury to the user and other persons or
destruction of property, always pay attention to these instructions and operational
requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation
unless otherwise specified in the manual.

Installation

– Do not install the machine in a location near alcohol,
paint thinner, or other flammable substances. If
flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or
electrical shock.
– Do not place the following items on the machine.
If these items come into contact with a high-voltage
area inside the machine, this may result in a fire or
electrical shock.
If these items are dropped or spilled inside the
machine, immediately turn off the power switches
of the machine and computer (1) and disconnect the
interface cable if it is connected (2). Then, unplug the
power plug from the AC power outlet (3) and contact
your local authorized Canon dealer.
• Necklaces and other metal objects
• Cups, vases, flowerpots, and other containers filled
with water or liquids
– When installing and removing the optional accessories,
be sure to turn the machine off , unplug the power
plug, and then disconnect all the interface cables and
power cord from the machine. Otherwise, the power
cord or interface cables may be damaged, resulting in a
fire or electrical shock.
– Do not install the machine in unstable locations,
such as on unsteady platforms or inclined floors, or
in locations subject to excessive vibrations, as this
may cause the machine to fall or tip over, resulting in
personal injury.
– The ventilation slots are provided for proper ventilation
of working parts inside the machine. Never place the
machine on a soft surface, such as a bed, sofa, or rug.
Blocking the slots can cause the machine to overheat,
resulting in a fire.
– Do not install the machine in the following locations, as
this may result in a fire or electrical shock.
• A damp or dusty location
• A location exposed to smoke and steam, such as near
a cookery or humidifier
• A location exposed to rain or snow
• A location near a water faucet or water
• A location exposed to direct sunlight
• A location subject to high temperatures
• A location near open flames
– When installing the machine, gently lower the machine
to the installation site so as not to catch your hands
between the machine and the floor or between the
machine and other equipment, as this may result in
personal injury.
x