Canon imageCLASS MF5850dn Basic Operation Manual page 77

Selecting Paper Source
4
Load envelopes into the multi-purpose
tray.
– If <MP TRAY STD SET> is set to <OFF>, go to
the next step.
– If <MP TRAY STD SET> is set to <ON>, skip to
step 6.
5
Press or
then press [OK].
S E L E C T
N O . 1 0
– To copy onto envelopes, select the paper size
from the followings:
<NO.10 (COM10)>, <Monarch>, <DL>, <ISO-
C5>, or <ISO-B5>. If you select one of these
size, <ENVELOPE> is automatically selected for
the paper type.
– For details, see "Paper Requirements, " on p. 2-6
and "Printable Area, " on p. 2-8.
When <NO.10 (COM10)>, <Monarch>, <DL>, or
<ISO-C5> is set, the machine may perform
printing even if a different size paper is loaded in
the multi-purpose tray. Make sure the correct size
paper is loaded before printing.
3-12
to select the paper size,
P A P E R S I Z E
( C O M 1 0 )
6
Use - [numeric keys] to enter the
desired copy quantity (1 to 5).
1 0 0 %
T E X T / P H O T O
– When loading envelopes into the multi-
purpose tray, set five at a time.
– If you are printing on envelopes, do not allow
more than five envelopes to accumulate in the
output tray. Always empty the output tray once
five envelopes have accumulated.
7
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page.
* E N V .
0 1