Communications Settings; Send Start Speed - Canon ImageRUNNER 2830 Facsimile Manual

Communications Settings

This section describes settings that the System Manager can make, including the
send start speed, reception speed, and RX mode. It also describes how to set,
change, and erase settings for forwarding received documents.

Send Start Speed

Setting the send start speed enables you to set the desired speed of transmission.
NOTE
The default setting is '33600 bps'.
1
Press
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(ID).
(Additional Functions) ➞ [System Settings].
(numeric keys) ➞ press
-

Communications Settings

6
6-3