Canon LASERBASE MF5700 Series User Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. All in One Printer
  5. LASERBASE MF5700 Series
  6. User manual

Canon LASERBASE MF5700 Series User Manual

Hide thumbs Also See for LASERBASE MF5700 Series:
Table of Contents

Advertisement

Quick Links

See also: Basic Manual
Series
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place
for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Canon LASERBASE MF5700 Series

Summary of Contents for Canon LASERBASE MF5700 Series

  • Page 1 Series Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference.

  • Page 2: Manuals For The Machine

    Manuals for the Machine The manuals for this machine are divided as follows. Please refer to them for detailed information. Depending on the system configuration and product purchased, some manuals may not be needed. Guides with this symbol are PDF manuals included on the Guides with this symbol are printed manuals.
  • Page 3 F146502 (LaserBase MF5770) Copyright Copyright © 2005 by Canon, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon, Inc.
  • Page 4 * Approx. 3 seconds per page fax data transmission time based on Canon FAX Standard Chart No.1, (Standard Mode) at 33.6Kbps modem speed. The Public Switched Telephone Network (PSTN) currently supports 28.8Kbps modem speeds or...

  • Page 5: Table Of Contents

    Contents Preface ............... . . vii How to Use This Manual .
  • Page 6 Chapter 5 Copying Documents You Can Copy ............5-1 Making Copies .
  • Page 7 Chapter 10 Machine Settings Accessing the Machine Settings ..........10-1 Menu Descriptions .

  • Page 8: Preface

    Preface Thank you for purchasing the Canon LaserBase MF5700 Series. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.

  • Page 9: Illustrations Used In This Manual

    Illustrations Used in This Manual Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the LaserBase MF5770. The model LaserBase MF5770 is used for illustration purposes in this manual. When there is any difference between MF5730, MF5750 and MF5770, it is clearly indicated in the text, e.g., “Only for the MF5770 model.”...

  • Page 10: Chapter 1 Introduction

    Chapter 9, “Troubleshooting.” If you cannot solve the problem or if you think your machine needs servicing, contact your local authorized Canon dealer or the Canon help line. Main Components of the Machine This section describes the main components of the machine.
  • Page 11 Operation panel Cassette Controls the machine. Holds the paper supply. Output tray Telephone line jack Outputs printouts. Connect the telephone cable. (Only for the MF5750/MF5770 models.) Front cover External device jack Open it when you install the cartridge, or remove jammed paper. Connect an external device.
  • Page 12 Rear View USB port Power socket Connect the USB (Universal Serial Bus) cable. Connect the power cord. Ethernet port Extension cover Connect the network cable. Protects paper supply in the cassette from dirt and dust. (Only for the MF5770 model.) Face up cover Open it when you output paper face up, or remove jammed paper.

  • Page 13: Operation Panel

    Operation Panel This section describes keys used when making copies, scanning and setting the Menu. For keys not described here, see Chapter 1, "Introduction," in the Facsimile Guide. ■ MF5770 f g h i COPY SCAN Redial / Pause Menu Coded Dial WXYZ...
  • Page 14 ■ MF5750 f g h i COPY SCAN Redial / Pause Menu Coded Dial WXYZ Directory Hook p q r ■ MF5730 f g h i COPY SCAN Menu p q r...

  • Page 15: Standby Display

    Standby Display The standby display differs depending on which mode is selected. The standby display in the Copy or Scan mode is as follows: ■ Copy Mode Copy ratio Paper size Exposure Image Copy quality quantity ■ Scan Mode NOTE •...

  • Page 16: Energy Saver Mode

    Energy Saver Mode This machine provides an energy saver function. When no operations are performed for a specified number of minutes, the machine automatically enters the energy saver mode. NOTE • The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes. You can also turn off the energy saver function.

  • Page 17: Paper Handling

    For high-quality copies, we recommend using paper and transparencies recommended by Canon. Some types of paper available at office supply stores may not be suitable for this machine. If you have any questions about paper and transparencies, contact your local authorized Canon dealer or the Canon help line.

  • Page 18: Printing Areas

    Please note that the term "printing area" represents both the recommended area for optimum print quality and the entire area where the machine can technically print from your computer. Printing area (light shade): Canon recommends that you print within this area. ■ Paper MAX.

  • Page 19: Loading Paper

    Loading Paper This section describes how to load paper in the cassette and the multi-purpose feeder. CAUTION When loading paper, take care not to cut your hands on the edges of the paper. IMPORTANT Do not load paper from the back of the machine with the cassette in place. Doing so may damage the paper feeding assembly inside the machine.
  • Page 20 While holding the lock release lever on the paper guide at the rear of the cassette, slide the paper guide to the mark indicating the desired paper size. IMPORTANT If the paper guide is not adjusted correctly for the size of the paper, the quality of your printouts may be adversely affected.
  • Page 21 While holding the lock release lever on the paper guide on the left side of the cassette, slide the paper guide to the mark indicating the desired paper size. The paper guides on the sides of the cassette move together. Make sure the paper stack does not exceed the load limit mark (A) and it is loaded under the hooks (B) on the paper guides.

  • Page 22: Loading Paper In The Multi-Purpose Feeder

    Loading Paper in the Multi-Purpose Feeder Use the multi-purpose feeder when you want to copy or print on the different paper which is in the cassette. Load paper one by one in the multi-purpose feeder. NOTE The paper in the multi-purpose feeder is fed prior to the paper in the cassette. Slide the paper guides to the mark of the desired paper size.

  • Page 23: Loading An Envelope In The Multi-Purpose Feeder

    NOTE When you load paper with a logo on, position the paper with the print side up (logo side) and insert it so that the top of the paper feeds first in the multi-purpose feeder. Specify the size and the type of the paper you load. For details on how to specify the paper size and type, see "Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder),"...

  • Page 24: Specifying The Paper Size And Type (Common For Cassette And Multi-Purpose Feeder)

    Insert the envelope square into the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp) first. Specify the size and the type of the paper you load. For details on how to specify the paper size and type, see "Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder),"...

  • Page 25: Specifying The Paper Type

    Specifying the Paper Type <PLAIN PAPER> is selected as the default paper type. When using paper other than plain paper, you can specify the paper type according to the following. Specifying the paper type can prevent poor copy quality, or the printout not being printed correctly. Press [Menu].

  • Page 26: Selecting The Paper Output Area

    Selecting the Paper Output Area Open the face up cover for face up paper output, or close the face up cover and pull out the output tray for face down paper output. IMPORTANT Do not open or close the face up cover while copying and printing. Face down paper output delivers paper with the printed side down on the output tray.

  • Page 27: Face Down Paper Output Area

    Face Down Paper Output Area The paper is delivered with the printed side down on the output tray. Paper is stacked in printed order. Close the face up cover, and pull out the output tray. IMPORTANT • Do not place the delivered paper back on the output tray. Doing so may result in paper jams. •...

  • Page 28: Document Handling

    Document Handling CHAPTER This chapter describes the types of documents you can scan, or copy with this machine and how to set them on the platen glass or in the ADF. Document Requirements The documents you place on the platen glass or loaded in the ADF for copying, scanning, or sending must meet these requirements: Platen Glass Type of Document Plain paper...

  • Page 29: Scanned Area Of A Document

    Scanned Area of a Document The shaded area in the illustration below shows the scanned area of a document. Make sure your document's text and graphics are within this area. MAX. 5.5 mm MAX. 5.5 mm MAX. 3 mm Scanning direction MAX.

  • Page 30: Loading Documents In The Adf

    The illustration below shows how to place an A4-size document on the platen glass. Gently lower the platen glass cover. The document is now ready for scanning. Loading Documents in the ADF Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a flat surface to even the stack.
  • Page 31 Adjust the document guides to the width of the document. Load the documents face up in the ADF. NOTE • For multiple page documents, the pages are fed one by one from the top of the stack (from the first page). •...

  • Page 32: The Paper Path Of The Adf

    The Paper Path of the ADF The machine scans documents from the first page. Scanning unit NOTE • When documents are loaded in the ADF, the scanning unit moves to the position shown above and stays there. • When documents are not loaded in the ADF, the scanning unit moves to scan it.

  • Page 33: Printing From Your Computer

    Printing from Your Computer CHAPTER This chapter explains how to print the documents from your computer using the printer driver included in the CD-ROM. Before Printing Before printing, software must be installed in your computer. • If not, please see “Install software,” in the Set-Up Sheet or Chapter 1, "Installation," in the Software Guide.

  • Page 34: Canceling Printing

    Select the command to print. In most cases, click [Print] in the [File] menu. The [Print] dialog box appears. From the [Select Printer] list box or the [Name] pull-down list in the [Print] dialog box, select the printer to be used. Click [Preference] or [Properties].

  • Page 35: Chapter 5 Copying

    Copying CHAPTER This chapter explains how to make copies, adjust scan settings to improve the image quality, and enlarge or reduce the copy sizes. It also describes the special copy features. Documents You Can Copy For information on the types of documents you can copy, their requirements, and details on setting up documents, see Chapter 3, "Document Handling."...

  • Page 36: Setting Enlarging/Reducing

    Setting Enlarging/Reducing You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios. Enlarging/Reducing Using Preset Copy Ratios Press [Enlarge/Reduce]. Press [ (-)] or [ (+)] to select the copy ratio ➞ press [OK]. You can select from the following: - 200% MAX.

  • Page 37: Improving Copied Image

    Improving Copied Image Adjusting the Image Quality (Resolution) You can adjust image quality to the appropriate level best suited for a document with text or photos. Three modes are available for adjusting the image quality. Press [Image Quality]. Press [Image Quality] repeatedly until the image quality you want appears. You can select from the following: - <TEXT>...

  • Page 38: Special Features

    Special Features The machine has the following SPECIAL COPY features. These features allow you to sort copies in page order and create special copies easily. - Collate Copy Sorts copies in page order. - 2 on 1 Reduces two documents to fit on a single paper. - Reserve Copy Reserves the next job while the machine is printing out.

  • Page 39: When Placing A Document On The Platen Glass

    Press [Start]. The machine begins scanning from the first page of the document. After scanning, the scanned documents will come out in order. NOTE When scanning multiple page documents, <MEMORY FULL> may appear in the LCD, Press [OK] to make the document come out automatically.

  • Page 40: On 1 Copy

    2 on 1 Copy Use the 2 on 1 copy function to reduce two sheets to fit on one sheet. Documents Copy 2 on 1 NOTE • This function is not available with an enlarging or reducing function. • This function is available only when the paper size setting is set to <A4> or <LTR>. •...
  • Page 41 ■ When Placing a Document on the Platen Glass Place the first page of a document on the platen glass. For details on how to place documents on the platen glass, see "Placing a Document on the Platen Glass," on p. 3-2.

  • Page 42: Reserve Copy

    Reserve Copy This feature allows you to reserve the next job while the machine is printing out a current job. NOTE The machine can store up to 10 copy jobs in memory. Press [Stop/Reset] twice to return to the standby display while the machine is printing out. NOTE It is necessary to return to the standby display in order to reserve the next copy job.

  • Page 43: Chapter 6 Scanning

    Scanning CHAPTER This chapter briefly explains how to scan documents into your computer using the scanner driver included in the CD-ROM. Before Scanning Before scanning, software must be installed in your computer. • If not, please see "Install software," in the Set-Up Sheet or Chapter 1, "Installation," in the Software Guide.

  • Page 44: More Information

    Press [SCAN] ➞ [Start] on the machine. If you are asked to select the program to launch, select "MF Toolbox Ver4.7." Scanning starts. The MF Toolbox and the MF Toolbox settings dialog box will open, but the document will be scanned without pressing [Start].

  • Page 45: Status Monitor

    Status Monitor CHAPTER This chapter explains how to check the status of the jobs stored in the machine, and to confirm or delete them as needed. Checking the Status of the Jobs Stored in the Machine Use [Status Monitor] to confirm or delete copy, fax*, print and report jobs stored in the machine. When using [Status Monitor], the LCD displays the jobs in the following order in each mode.

  • Page 46: Confirming Transmission Results

    Press [ (-)] or [ (+)] to confirm the transaction number and time. NOTE For the fax job with multiple destinations (sequential broadcasting), only the fax/telephone number to be sent first is displayed. If you want to delete the fax job, press [OK]. NOTE If you delete the fax job with multiple destinations, the machine does not send the fax to any of the destinations registered for the job.

  • Page 47: Confirming And Deleting A Print Job

    If you want to delete the copy job, press [OK]. If you decide to delete the job, press [ (-)] for <YES>. NOTE To cancel deleting the job, press [ (+)] for <NO>. Once the job is deleted, the job cannot be restored. Press [Stop/Reset] to return to the standby display.

  • Page 48: Chapter 8 Maintenance

    Maintenance CHAPTER This chapter explains how to clean the machine, replace the toner cartridge, and repack and transport the machine. Periodic Cleaning Your machine requires little periodic maintenance. This section describes the necessary cleaning procedures for your machine. CAUTION • When cleaning the machine's exterior or the platen glass, be sure to disconnect the power cord before cleaning the machine.

  • Page 49: Cleaning The Adf Area

    Cleaning the ADF Area Black lines may appear in copies when the ADF is used to feed documents. This is caused by paste, ink, correction fluid, or other foreign matters in the read area of the platen glass (shaded area). Use a clean soft cloth to wipe the read area clean. Take particular care to clean at the locations where the black lines are appearing on copies.

  • Page 50: When To Replace The Cartridge

    When to Replace the Cartridge The cartridge is a consumable item and should be replaced when the toner runs out. If white streaks or light bands appear on the printouts, the toner is running low. Paper feeding direction NOTE Before handling the cartridge, see the precautions in "Handling and Storing the Cartridge," on p. 8-4. Remove the cartridge from the machine.

  • Page 51: Print Yield

    This section describes the approximate number of printouts that can be made per cartridge. ■ Approximate Print Yield Canon Cartridge EP-27: Approx. 2,500 printouts (A4 at 4% dot coverage*). * The term “A4 at 4% dot coverage” denotes a document on which the area covered with toner is 4% of the total area of an A4-size sheet.

  • Page 52: Storage Precautions

    • Always hold the cartridge as shown so that the side with the instructions (A) faces up. Do not forcefully move or push the drum protective shutter (B) in any way. ■ Storage Precautions WARNING Do not store cartridges or copy paper in places exposed to open flames, as this may cause the toner or copy paper to ignite, resulting in burns or a fire.

  • Page 53: Replacing The Cartridge

    ■ Storing Partially Used Cartridges If you remove a cartridge from the machine, store the cartridge as described below. Place the cartridge in its protective bag so that the side with the written instructions faces up. Then, place the cartridge into its shipping box. Be sure to securely close the lid of the shipping box. If you do not have the protective bag or shipping box for the cartridge, store the cartridge in a dark location.
  • Page 54 Remove the new cartridge from its protective bag. NOTE Save the protective bag. You may need it later when you remove the cartridge from the machine. Rock the cartridge 5 or 6 times to distribute the toner evenly. Place the cartridge on a flat and stable surface. Fold the tab (A) on the sealing tape (B) as shown below, and pull it out straight while supporting the cartridge.
  • Page 55 Hold the cartridge and align the projections (A) on both sides of the cartridge to the guides (B) in the machine, then gently slide the cartridge into the machine as far as it will go. Be sure to position the arrow mark (C) on the cartridge towards the inside of the machine. Close the front cover.

  • Page 56: Repacking And Transporting Your Machine

    Repacking and Transporting Your Machine Be sure to unplug the power cord before transporting the machine. If the machine is likely to be subjected to vibration (e.g., when transporting over long distances), the following precautions should be taken. If you do not follow these precautions, the machine may be damaged or the quality of your printouts may be adversely affected.

  • Page 57: Transporting The Machine By Car

    Transporting the Machine by Car Pack the machine, using the original packing material and box. Place the machine on a level, stable surface. IMPORTANT • Do not leave the machine inside a car for a long period of time; the temperature can become very high or low. •...

  • Page 58: Chapter 9 Troubleshooting

    Troubleshooting CHAPTER This chapter describes the problems you might encounter when using the machine and their remedies. It also explains what to do if you cannot solve the problem by yourself. Clearing Jams This section describes how to remove jammed paper. Removing Jammed Paper from Inside the Machine When print media jams inside the machine, the LCD displays <REC.
  • Page 59 IMPORTANT • Remove watches and any bracelets or rings when touching the inside of the machine. These items might be damaged if they come into contact with the parts inside the machine. • To avoid possible damage to the machine, do not touch the pins (A) near the left end of the transfer roller (B). •...
  • Page 60 Roll the leading end of the paper outwards so that the printed surface is on the inside of the roll, then gently pull the rolled up paper out of the machine. If the leading edge of the paper is visible but has not entered the imaging area, pull the paper forwards and roll it inwards.
  • Page 61 • Do not pull the jammed paper upward; the toner on the paper will stain the machine and cause a permanent reduction in print quality. Gently pull the jammed paper between the output rollers until the leading edge emerges from the machine.
  • Page 62 If the jammed paper is badly folded, similar to the folds of an accordion, ease the jammed paper loose and then pull it out of the machine. Close the front cover. Pull out the cassette completely. Hold both sides of the jammed paper and slowly pull it out in the direction of the arrow. ●...

  • Page 63: Removing Jammed Paper From The Adf

    Push the paper release levers back to their original position and close the face up cover. IMPORTANT • Be sure to push the paper release levers back to their original position. If the levers are left pushed down, the paper jam error will not be resolved. •...
  • Page 64 Widen the document guides until they stop, and remove the paper so as not to be caught by the guides. Open the ADF and gently remove the jammed paper from the ADF. Open the ADF and gently remove the jammed paper from the document output tray. NOTE After removing jammed paper, even edges of the document before loading it in the ADF again.

  • Page 65: Lcd Messages

    A problem has occurred in the printer. Remedy Reset the machine by opening the front cover and then closing it. If the message persists, unplug the machine from the power supply and contact your local authorized Canon dealer or the Canon help line. CHECK PRINTER COVER Cause The front cover is not closed completely.
  • Page 66 DOCUMENT TOO LONG Cause The document is longer than 1 m, or is not feeding correctly. Remedy Reduce the length of the document to within 1 m, and then copy it. INSTALL CARTRIDGE Cause The cartridge is not installed or not installed correctly. Remedy Install the cartridge correctly.

  • Page 67: Paper Feeding Problems

    Unplug the machine from the power supply and wait approximately 3 minutes to 5 minutes, then plug it in again. If this does not solve the problem, unplug the machine and contact your local authorized Canon dealer or the Canon help line. TONER SUPPLY LOW** Cause The toner is running low.
  • Page 68 (See "Loading Paper," on p. 2-3.) Is the proper transparency loaded in the multi-purpose feeder? Do not use any transparencies designed for color copiers. They will cause a paper jam. Please use transparencies recommended by Canon. 9-11...
  • Page 69 Paper feeds curled. Is the proper paper loaded? Check if the proper paper is loaded in the cassette or multi-purpose feeder. (See Chapter 2, "Paper Handling.") Paper stacked roughly. Is the proper paper loaded? Check if the proper paper is loaded in the cassette or multi-purpose feeder. (See Chapter 2, "Paper Handling.") Check if the appropriate paper type is selected in <PAPER TYPE>...

  • Page 70: Copying Problems

    Envelopes do not feed correctly. Are the envelopes loaded correctly? Make sure the envelopes are loaded correctly. (See "Loading an Envelope in the Multi-Purpose Feeder," on p. 2-7.) Load an envelope one by one in the multi-purpose feeder. Is the proper envelope loaded? Load the recommended envelopes (COM10, MONARCH, DL, or ISO-C5) in the multi-purpose feeder.

  • Page 71: Print Quality Problems

    Print Quality Problems The print quality is not what you expect; print is not clear, has missing dots or white streaks. Are the size, thickness and type of the paper you are using within the specifications of the machine? Check that the paper you are using is supported by the specifications of the machine. (See "Print Media Requirements,"...
  • Page 72 Copies are too dark or too light. Is the exposure adjusted correctly? Adjust the exposure correctly using [Exposure]. (See "Adjusting the Exposure (Density)," on p. 5-3.) Is the machine in the toner saver mode? Set <TONER SAVER MODE> to <OFF> in <COMMON SETTINGS> of the Menu. (See <3. TONER SAVER MODE>...

  • Page 73: Printing Problems

    3 minutes to 5 minutes, then plug it in again. If the problem is fixed, the Alarm indicator will turn off, and the LCD will return to the standby mode. If the Alarm indicator remains flash, unplug the machine, and contact your local authorized Canon dealer or the Canon help line.

  • Page 74: General Problems

    "Connect power cord," in the Set-Up Sheet.) If the LCD remains blank, unplug the machine and wait approximately 3 minutes to 5 minutes until the temperature inside the machine lowers, then plug it in again. If the LCD remains blank, unplug the machine, and contact your local authorized Canon dealer or the Canon help line.

  • Page 75: If You Cannot Solve The Problem

    IMPORTANT Attempting to repair the machine yourself may void the limited warranty. If you need to contact your local authorized Canon dealer or the Canon help line, make sure you have the following information: •...

  • Page 76: Machine Settings

    Machine Settings CHAPTER This chapter explains how to adjust machine settings. The list of all the settings is also provided for your reference. Accessing the Machine Settings Press [Menu]. Press [ (-)] or [ (+)] to select the menu you want to change ➞ press [OK]. You have now accessed the settings in the list.

  • Page 77: Common Settings

    Name Descriptions 2. MP TRAY 1. PAPER SIZE Selects the paper size for the MP tray. A4, B5, A5, EXECUTIV, COM10, MONARCH, DL, ISO-C5, LTR, LGL 2. PAPER TYPE Selects the paper type to be used in the MP tray. PLAIN PAPER, PLAIN PAPER L, HEAVY PAPER, HEAVY PAPER H, TRANSPARENCY COMMON SETTINGS...
  • Page 78 Name Descriptions 4. RX DONE TONE Sets the reception end tone settings. ERROR ONLY The reception end tone sounds only when any error occurs while printing. 1 to 3 (1) The reception end tone does not sound. The reception end tone sounds. 1 to 3 (1) 5.

  • Page 79: Copy Settings

    COPY SETTINGS Name Descriptions 1. STD. IMAGEQUALITY Selects the document type. TEXT/PHOTO: Text/photo mode TEXT: Character mode PHOTO: Photo mode 2. STANDARD EXPOSURE Sets how the exposure is adjusted. MANUAL Adjusts the exposure manually. The exposure can be adjusted in 9 increments. (center (5)) AUTO The exposure is adjusted automatically.

  • Page 80: Printer Settings

    PRINTER SETTINGS Name Descriptions 1. ERROR TIME OUT Sets the length of time before the machine returns an error when no data is received from the computer. The error time out is on. Sets the time out period. 5SEC to 300SEC (15SEC) The error time out is off.

  • Page 81: Chapter 11 Appendix

    Organic Photosensitive Conductor Copying System Indirect Electrostatic Transfer System Developing System Toner Projection System Fixing System Canon's RAPID Fusing System™ Resolution Approx. 600 dpi x 600 dpi Number of Tones Platen glass: Up to A4 size Acceptable Documents Sheets, books, and three-dimensional objects (up to 2 kg)
  • Page 82 For high-quality copies, we recommended using paper and transparencies recommended by Canon. Some types of paper available at office supply stores may not be suitable for this machine. If you have any questions about paper and transparencies, consult your local authorized Canon dealer or the Canon help line.

  • Page 83: Index

    Index Symbols DEFAULT SETTINGS setting, 10-2 DISPLAY LANGUAGE settings, 10-3 (–), (+) keys, 1-4 Document feeder tray, 1-1 loading, 3-3 orientation, 2-9 ADF (Automatic Document Feeder), 1-1 output tray, 1-1 capacity, 3-4 placing, 3-2 jams in, 9-6 printing, 4-1 loading documents in, 3-3 problem, 3-1 paper path, 3-5 quantity, 3-1...
  • Page 84 General problems, 9-17 Paper acceptable paper, 2-1 cassette, 1-2 feeding problems, 9-10 Image Quality jam, 2-1, 9-1, 9-6 loading, 2-3 adjusting, 5-3 orientation, 2-9 key, 1-4 output area, 2-10 INSTALL CARTRIDGE message, 9-9 printing area, 2-2 requirements, 2-1 type, 2-9, 2-10 Paper output area Jammed paper removing face down, 2-11...
  • Page 85 REC. PAPER JAM message, 9-9 USB port, 1-3 Repacking, 8-9 Replacing the Cartridge, 8-6 Reserve copy, 5-8 VOLUME CONTROL settings, 10-2 RX DONE TONE setting, 10-3 Weight SCAN DONE TONE setting, 10-3 document, 3-1 SCAN key, 1-4 machine, 11-2 Scanned area, 3-2 print media, 2-1 Scanning When to Replace the Cartridge, 8-3...
  • Page 86 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands CANON FRANCE S.A.

This manual is also suitable for:

Laserbase mf5730Laserbase mf5750Laserbase mf5770

Table of Contents