7
Place the toner cartridge on a flat surface,
fold back the tab of the sealing tape (A)
located at left side of the toner cartridge,
then pull the seal completely out.
–
If toner is adhered on the removed seal, be
careful that your hands or clothes do not get
dirty from touching the toner.
–
If your hands or clothes get dirty from touching
the toner, wash them immediately in cold
water. Do not use hot water. If you do, the toner
may be set permanently.
–
Do not pull the seal out at an angle.
8
Align the toner cartridge to the guides in
the machine and slide the cartridge
completely into the machine until it
stops.
9
Close the front cover.
If you cannot close the front cover, do not force it
to close. Open the cover and make sure the toner
cartridge is properly set in the machine.
Replacing the Toner Cartridge
11-11