Using The One-Touch Keys; Using Coded Dial Codes - Canon imageCLASS MF5850dn Basic Operation Manual

Specifying Destinations

Using the One-Touch Keys

You can specify up to 20 destinations using one-
touch keys.
– To use this feature, you need to first register destinations in
one-touch Keys. (See "Storing/Editing One-Touch Keys, " on
p. 5-3.)
– A maximum of 201 destinations can be specified at the same
time. (Out of the 200 destinations, a number or address can be
specified with – ,
specify a group, which is made up of several destinations,
each destination in the group is counted as a separate
address.
1
Place documents.
2
Press
3
Press
select <FAX>, then press [OK].
F A X
S E L E C T : O K
If the model of your machine is MF5850dn and
no USB memory is inserted in the USB memory
port, skip this step.
6-20
[numeric keys] and [Tone].) If you
[SEND/FAX]/ [FAX].
[SEND/FAX] repeatedly to
4
Press the desired one-touch key (01 to
20).
Ex.
T E L = 1 2 3 X X X X X X X
[ 0 1 ] J o h n
If you pressed a wrong key, press
[Stop/Reset], then try again from step 3.
5
Press [Start].
– When you place the documents on the platen
glass, press or
size, then press
When scanning is complete, press [OK] to
start sending.
When <TIME OUT> is set to <ON> in <TX
SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the
destination by any other method than using
, [numeric keys] and
starts scanning automatically without pressing
[Start], after the preset time for this setting is
elapsed. (See "Time Out Mode, " on p. 6-41.)
– You can also adjust the following scan
settings as necessary, using the keys on the
operation panel, after specifying the
destination in step 4.
• Density: See "Adjusting Density, " on p. 6-29.
• Image Quality: See "Selecting Image Quality, "
on p. 6-30.
• 2-Sided: See "2-Sided Documents, " on p. 6-
31.

Using Coded Dial Codes

You can specify up to 180 destinations using coded
dial codes.
– To use this feature, you need to register destinations in coded
dial code beforehand. (See "Storing/Editing Coded Dial Codes, "
on p. 5-12.)
– A maximum of 201 destinations can be specified at the same time.
(Out of the 200 destinations, a number or address can be specified
with – , [numeric keys] and
group, which is made up of several destinations, each destination in
the group is counted as a separate address.
to select the document
[Start] for each document.
–
[Tone], the machine
[Tone].) If you specify a