Using The Multi-Purpose Tray With Irregular Paper Sizes - Canon imageCLASS MF5850dn Basic Operation Manual

4
Load the papers into the multi-purpose
tray.
– If <MP TRAY STD SET> is set to <OFF>, go to
the next step.
– If <MP TRAY STD SET> is set to <ON>, skip to
step 7.
5
Press or
then press [OK].
S E L E C T P A P E R
L T R
– To copy onto standard size papers, select the
paper size from the followings:
<LTR>, <EXECUTIV>, <A4>, <B5>, <A5>, or
<LGL>.
– For details, see "Paper Requirements, " on p. 2-6
and "Printable Area, " on p. 2-8.
to select the paper size,
S I Z E
6
Press or
then press [OK].
S E L E C T P A P E R
P L A I N P A P E R
– To copy onto standard size papers, select the
paper type from the followings:
<PLAIN PAPER>, <PLAIN PAPER L>, <COLOR>,
<RECYCLED>, <HEAVY PAPER 1>, <HEAVY
PAPER 2>, <TRANSPARENCY>, or <LABELS>.
– For details, see "Paper Requirements, " on p. 2-6
and "Printable Area, " on p. 2-8.
<TRANSPARENCY> can be selected only if <LTR>
or <A4> is selected as the paper size.
7
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
1 0 0 %
T E X T / P H O T O
8
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page.
Using the Multi-Purpose Tray with
Irregular Paper Sizes
This section describes how to copy onto non-
standard size paper using the multi-purpose tray.
If <MP TRAY STD SET> is set to <OFF>, the display to specify the
paper size and type for the multi-purpose tray appear every
time you load paper on the multi-purpose tray. If <MP TRAY STD
SET> is set to <ON>, copying can be performed only for the
registered paper size and type. (See "Setting Paper Size and Type, "
on p. 2-17.)
Selecting Paper Source
to select the paper type,
T Y P E
L T R
0 1
3-9