Canon imageCLASS MF5850dn Basic Operation Manual page 210

– If you select <JPEG>, skip to step 8.
– If you specify a file server's address from
Address Book without selecting the sending
method, settings specified in <STANDARD
SETTINGS> in <TX SETTINGS> in <TX/RX
COMMON SET.> in <TX/RX SETTINGS> are
displayed.
7
Press or
for <DIVIDE INTO PAGES>, then press
[OK].
D I V I D E I N T O
O F F
– <OFF>: Sends multiple images as a single file
without dividing them.
– <ON>: Separates multiple images and send
them as separate files.
If you have selected <JPEG> in step 6, this setting
is not available. <DIVIDE INTO PAGES> is
automatically set to <ON> when sending
documents in JPEG format.
8
Press or
then press [OK].
R E S O L U T I O N
2 0 0 2 0 0 d p i
– File server (B&W): <200×200dpi>,
<300×300dpi>, <400×400dpi>,
<600×600dpi>, <150×150dpi>,
<200×100dpi>
– File server (Color): <200×200dpi>,
<300×300dpi>, <100×100dpi>,
<150×150dpi>
If <PDF(COMPACT)> is selected as the file format,
only <300×300dpi> can be selected.
to select <OFF> or <ON>
P A G E S
to select the resolution,
9
Press or
type, then press [OK].
O R I G I N A L
T E X T / P H O T O
– <TEXT/PHOTO>: For documents that contain
text and photos.
– <TEXT>: For text documents.
– <PHOTO>: For documents that contain fine
text or photos.
If you have selected <PDF(COMPACT)> as the file
format in step 6, the original type is automatically
set to <TEXT/PHOTO>.
10
Press [Start].
When you place the documents on the platen
glass, press or
size, then press
When scanning is complete, press [OK] to start
sending.
Scanning starts, and the scanned data is sent to
the specified file server.
– You can also adjust the following scan settings
as necessary.
• Density: See "Adjusting Density (Scan to File
Server), " in the e-Manual.
• 2-sided: See "2-Sided Documents (Scan to
File Server), " in the e-Manual.
– You can set the document's name and the
message body text. (See "Naming a Sent
Document Using a File Server" and "Message, " in
the e-Manual.)
Basic Scanning Operations
to select the original
T Y P E
to select the document
[Start] for each document.
8-7