ReducNg A ReceVed Document; Reducing A Received Document - Canon imageCLASS MF5850dn Basic Operation Manual

Reducing a Received Document

Reducing a Received Document
You can set the machine to automatically reduce received documents so that the whole
document is printed within the printable area of the paper. The default setting is <ON>
(<AUTO> and <VERTICAL ONLY>).
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
M E N U
4 . T X / R X
3
Press or
COMMON SET.>, then press [OK].
T X / R X
2 . T X / R X
4
Press or
then press [OK].
T X / R X
2 . R X
5
Press or
REDUCTION>, then press [OK].
R X S E T T I N G S
2 . R E C E I V E
6-46
to select <TX/RX
S E T T I N G S
to select <TX/RX
S E T T I N G S
C O M M O N S E T .
to select <RX SETTINGS>,
C O M M O N S E T .
S E T T I N G S
to select <RECEIVE
R E D U C T I O N
6
Press or
press [OK].
R E C E I V E
If you select <OFF>, skip to step 12.
7
Press or
REDUCTION>, then press [OK].
R E C E I V E
1 . R X R E D U C T I O N
8
Press or
<FIXED REDUCTION>, then press [OK].
R X R E D U C T I O N
F I X E D
– If you select <AUTO>, the image is reduced
automatically. Skip to step 10.
– If you select <FIXED REDUCTION>, go to the
next step.
9
Press or
reduction ratio (90%, 95%, 97%, or 75%),
then press [OK].
S E L E C T R E D U C E
to select <ON>, then
R E D U C T I O N
O N
to select <RX
R E D U C T I O N
to select <AUTO> or
R E D U C T I O N
to select a preset
%
9 0 %