Scanning Documents To A Computer (Usb Connection); Scanning Documents To A Computer (Network Scan) - Canon imageCLASS MF5850dn Basic Operation Manual

Basic Scanning Operations
– You can set the document's name. (See
"Naming a Sent Document Using a USB
Memory, " in the e-Manual.)
– Scanned images will be assigned serial
numbers in the order they are scanned,
beginning with 0001_0001.
– When scanning multiple page documents,
<MEMORY FULL> or <USB MEMORY FULL>
may appear on the display and scanning may
be canceled. If this happens, press [OK] to
return to the standby mode. When <MEMORY
FULL> is displayed, print, send, or delete any
documents stored in memory. When <USB
MEMORY FULL> is displayed, delete any
documents stored in USB memory.
Scanning Documents to a
Computer (USB Connection)
This section describes the basic procedures for
scanning documents and storing the scanned
images on a computer connected to the machine
via a USB cable, by using the operation panel of the
machine.
– Your machine must be connected with a USB cable and the
USB scanner driver must be loaded to scan.
– You can also perform this operation from your computer. For
details, see "Basic Methods for Scanning Documents to a
Computer (USB Connection), " in the e-Manual.
8-10
1
Place documents.
2
Press [SCAN] repeatedly to select
<USB SCANNING>.
The SCAN indicator lights up and the machine
enters the scan standby mode.
3
Press [Start] on the machine.
– If you are asked to select a program to launch,
select "MF Toolbox Ver4.9. " The scanned
document will be processed according to
your settings.
– When scanning is complete, a folder with the
scanning date will be created in the [My
Pictures] folder in the [My Documents] folder,
and your document will be saved in this
folder. (For Windows Vista, the folder will be
created in the [Pictures] folder.)
Scanning Documents to a
Computer (Network Scan)
This section describes the basic procedure for
scanning documents using Color Network
ScanGear.
If you are using Color Network ScanGear for the first time after
installing it, the network scanner to be used must be selected
with the ScanGear Tool. For details, see "Selecting the Network
Scanner to be Used (Network Scan), " in the e-Manual.