Standard Send SettNgs; Storing The Standard Send Settings; Restoring The Standard Send Settings To Their Default; Standard Send Settings - Canon imageCLASS MF5850dn Basic Operation Manual

Standard Send Settings

Standard Send Settings
This mode enables you to specify the standard scan settings for density and resolution.

Storing the Standard Send Settings

You can change and store the Standard Send
Settings. The default settings are as follows:
– <DENSITY>: <STANDARD>
– <RESOLUTION>: <200×200dpi>
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
M E N U
4 . T X / R X
3
Press or
COMMON SET.>, then press [OK].
T X / R X S E T T I N G S
2 . T X / R X
4
Press or
then press [OK].
T X / R X C O M M O N
1 . T X S E T T I N G S
5
Press or
SETTINGS>, then press [OK].
T X S E T T I N G S
5 . S T A N D A R D
to select <TX/RX
S E T T I N G S
to select <TX/RX
C O M M O N S E T .
to select <TX SETTINGS>,
S E T .
to select <STANDARD
S E T T I N G S
6
Press or
setting item, then press [OK].
S T A N D A R D
1 . D E N S I T Y
You can specify the following settings:
– <DENSITY>: Adjusts the density of
documents. (See "Adjusting Density, " on p. 6-
29.)
– <RESOLUTION>: Adjusts the image quality of
documents. (See "Selecting Image Quality, " on
p. 6-30.)
7
Each time you set the desired setting
item, press [OK].
D E N S I T Y
8
Press [Stop/Reset] to return to the
standby mode.
Restoring the Standard Send
Settings to Their Default
You can restore the Standard Send Settings to their
original default settings.
1
Press [Menu].
to select the desired
S E T T I N G S
S T A N D A R D
6-35