AdjustNg The Pause TMe; Adjusting The Pause Time - Canon imageCLASS MF5850dn Basic Operation Manual

Adjusting the Pause Time

Adjusting the Pause Time
Some overseas dialing may be affected by the distance or complex routing of connections
when dialing the international access code, country code, and the destination's telephone
number all at once. In such cases, insert a pause after the international access code. When
the machine dials the number, it will pause where the pause was inserted in the number.
This helps to improve the connection. The default setting is two seconds.
– You can insert a pause when you dial the fax number using
(With Pauses), " on p. 6-15.)
– Pauses entered at the end of dialed fax numbers are always 10 seconds long.
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
M E N U
4 . T X / R X
3
Press or
SETTINGS>, then press [OK].
T X / R X
3 . F A X
4
Press or
then press [OK].
F A X S E T T I N G S
3 . T X
6-40
to select <TX/RX
S E T T I N G S
to select <FAX
S E T T I N G S
S E T T I N G S
to select <TX SETTINGS>,
S E T T I N G S
– [numeric keys]. (See "Dialing an Overseas Number
5
Press or
then press [OK].
T X S E T T I N G S
2 . P A U S E
6
Use , , or
set the pause time, then press [OK].
P A U S E T I M E
The pause time can be set from 1 to 15 seconds
in one second increments.
7
Press [Stop/Reset] to return to the
standby mode.
to select <PAUSE TIME>,
T I M E
– [numeric keys] to
2 S E C