Advertisement
Available languages
Available languages
Inserting batteries
Detach the batterv
cover on the rear of the remote
control
and
insert two R6 (size AA) batteries.
R6'(AA)
When to replace the batteries
The maximum
operational
distance
between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace
the batteries
with new ones.
To use the remote control
Buttons
on the remote
control
with the same names
as those
on the main unit can be used instead.
There
are operations
performed
by both the main unit and the remote
control,
but
there
also exist operations
performed
by the remote
control
only.
Read this manual
for each operation
and the buttons
that can
be used.
" Some buttons on the remote control have two different functions.
To use the function
on the button,
simply
press the button. To
use the function
on the plate above or below the button,
press
the button while pressing
SHIFT.
SHIFT
To
use FUNCTION on the remote control
FUNCTION
substitutes
for the function
buttons
(TAPE
(1, 2),
TUNER
(FM, AM), AUX, D-IN, CD, MD) on the main unit.
Each time FUNCTION
is pressed,
the next function
is selected
cyclically.
When
tapes
are inserted
in both decks,
both decks
can be selected
with FUNCTION.
m
If the unit is not going to be used for an extended
period
of
time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
The remote control
may not operate
correctly
when:
- The line of sight between
the remote
control
and the remote
sensor
inside the display
window
is exposed
to intense
light,
such as direct sunlight
- Other remote controls
are used nearby (those of a television,
etc.)
L——J
L———J
To turn the unit on
Press POWER.
To turn the unit off
Press
POWER
again.
If the power is turned off after the clock is set
The red indicator
below the power button
lights to indicate
that
power
is supplied.
Nothing
is displayed
on the display
window
(setting
when you purchase
the unit).
To turn off the
CD
compartment
light
Press the
button
while
pressing
the CD button.
Repeat
the
same operation
to restore the light.
To turn off the MD compartment
light
Press the
button while
pressing
the MD button.
Repeat
the
same operation
to restore the light.
Im
When you purchase
this unit, the power economizing
mode
is set to ON.
If the tape, CD, and MD are stopped
and there is no audio
input from any connected
external
equipment
for 10 minutes,
the power shuts off. To set the power economizing
mode to
OFF, see page 34.
iON&iNIhk
m%
DI'SPLAY W"INDOW;S
DEMO DISPLAY
When the power cord is plugged
into an electrical
outlet for the
first time after purchase,
a demo display will appear in the display
window.
When the power is turned on, the demo display will end.
When the power is turned off, the demo display will appear again.
Until the clock is set, the demo display will appear whenever
the
power is turned
off.
When the clock is set
Normally,
the demo display
will not appear.
If +>
is pressed
when the power
is off, the demo display
will
appear.
To end the demo display,
press +>.
(For setting
the
clock, see page 31.)
After the power is turned on
Display
of source and volume
level flashes
for 4 seconds
while
the unit is being powered
on.
During this period,
the unit cannot
be operated.
6
ENGLISH
Advertisement
