Aiwa XR-H330MD Operating Instructions Manual page 21

Only the first tracks of the CDs on the trays are recorded
continuously. You can keep recording continuously without
interl"uption, if you press DISC CHANGE to replace the CDs
during recording.
1 Irsert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
2 Press CD and load the CDs to be recorded.
3 Press CD > MD twice to start recording.
")> MD~irl~le" is
displayed and
recording begins with the first
triick
of the CD on tray 1.
To replace CDS during recording, press DISC CHANGE
and replace with other CDs. Then, press DISC CHANGE to
cl >se the disc com~artment.
When recording finishes, "TOC EDIT" is displayed and the
data concerning the contents of the recording are registered.
. The index mark is registered automatically at the beginning
of the track.
mm
\Vhen you perform the "auto first tracks recording", cancel
random, repeat or programmed play of CD (page 13).
s hVhen "LONG CD" is displayed, playing time to record of the
CD is Iongerthan remaining recordable time of the MD. Then,
replace the MD and press CD MD again. You can record
within the limits of remaining recordable time of the MD.
!2isF lay information during recording
Whel DISPLAY is pressed repeatedly during recording, the
display changes as follows.
p" Track number and ~
Remaining time of the CD 1
L
elapsed playing
time of the CD
Track number of the MD +-- Remaining recordable
1
being recorded and time of the MD
elapsed recording time
Up to 30 tracks can be programmed and recorded from any of
,,:~
the inserted CDs. For programming, see page 13.
39
':~:
1
2
3
4
3
SHIFT
Insert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
Press CD and load CDs.
Press PRGM on the remote control while pressing
SHIFT.
"PRGM" is displayed.
"PRGM"
4
Press DISC DIRECT PLAY 1-3 to select a CD.
Then, press numbered buttons O-9 and +1 O on
the remote control to program a track.
Total number of
Selected track number programmed tracks
Selected disc Program number Total playing time of
number
programmed tracks
5
6
Repeat step 4 to program other tracks.
Press CD MD to start recording.
Recording begins.
When the programmed tracks finish playing, the recording
stops automatically.
When the recording finishes, "TOC EDl~ is displayed anti
the data concerning the contents of the recording are
registered.
. The index mark is registered automatically at the beginning
of each track in the programmed order.
For fdrther information, see page 33.
ENGLISH
2 I