Aiwa XR-H330MD Operating Instructions Manual page 13

Use the remote control
2' Start playback.
If the last of the track fades out (ends with the sound gradually
decrc?asing), the fadeout portion also will be skipped.
To
return to normal playback
Press
CD BLANK SKIP
again, and the dot in the display window
will disappear.
Be sure to deactivate the blank skip function when performing Al
EDIT recording (page18), PROGRAMMED ED"IT recor&ng
(pagel 9), or the recording of programmed playback (pagel 3).
Use ihe remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
You cannot perform random play of the programmed tracks.
REPEAT play
A single disc or all the discs can be played repeatedly,
. You can also repeat the programmed tracks.
Press RANDOM/REPEAT repeatedly while pressing
SHIFT.
Each time it is pressed, the function is selected cyclically.
r
@ RANDOM play _ C2)REPEAT play
Cancel +--- @ RANDOM/REPEAT
play 1
fi> "RANDOM" lights up on the display.
@ "G" lights up on the display.
> "RANDOM" and "~" light
Up
on the display.
To play all discs,
press -4> to start play.
To play a single
disc,
press
DISC DIRECT PLAY 1-3
During random play, the following operations are not possible:
- to sAect the tracks directly with the numbered buttons.
The random play will be canceled.
to sl<ip to the previously played track with 4< or
MULTI JOG.
Up tc 30 tracks can be programmed from any of the inserted
discs
2
1
3
5
SHIFT
*,W
1
2
3
Press DISC DIRECT PLAY 1-3 to select a disc.
Press numbered buttons 0-9 and +10 to programl
a
track.
Example:
To select the 25th track, press
+10 W
and 5.
To select the 10th track, press +70 and 0.
Total number of
Selected track number programmed tracks
Selected disc Program
Total playing time of
number
number programmed tracks
4
Repeat steps 2 and 3 to program other tracks.
5 Press 4* to start play.
To check the program
Each time << or ›~ is pressed in stop mode, a track number
and a program number will be displayed.
m
To clear the program
Press in stop mode. The program will be also cleared when,
you open the disc compartment.
To add tracks to the program
Repeat steps 2 and 3 in stop mode, The track will be programmed
after the last track.
. If you attempt to program more than 30 tracks, "PRGM FULL"
is displayed.
To change the programmed tracks
You cannot change the order of programmed tracks. Clear the
program by pressing and repeat all the steps again.
To
play the programmed tracks repeatedly
After programming the tracks, press
RANDOM/REPEAT
repeatedly while pressing
SHIFT
until "~" appears on the
display.
m
. During programmed play, you cannot select the tracks directly
with the numbered buttons. "Can't USE" will be displayed.
. In the following cases, the total playing time of programmed
tracks is displayed "--:--", which means you cannot check the
total playing time of programmed tracks, but the programmed
tracks are still registered in memory.
- the total playing time of programmed tracks exceeds 99 minutes
59 seconds.
you selected a track having a track number more than 30.
ENGLISH
13