Aiwa XR-H330MD Operating Instructions Manual page 11

II
1
4
J
After playback on one deck finishes, the tape in
will start to play without interruption.
1
the other deck
1 Insert tapes into deck 1 and deck 2.
.2
Press
TAPE DECK1 /2 to select the deck to be
played back first.
.3 Set
the reverse
mode to "Z)".
1
Press
MODE
repeatedly until "Deck 2 MODE?" is
displayed.
2 Within 10 seconds, press ENTER, then select "11" with
MULTI JOG.
3 Within 10 seconds, press ENTER again.
4 Press 4> to start playback.
Playback continues until is pressed.
About cassette tapes
. To prevent accidental erasure,
break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
. 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the
mechanism.
k
ENGLISH
1II