Download Print this page

Aiwa XR-H330MD Operating Instructions Manual page 24

Aiwa md/cd cd stereo system operating instruction xr-h330md
Hide thumbs Also See for XR-H330MD:

Advertisement

Available languages

Available languages

Twice as long as the time printed on the MD can be obtained
by
using the monaural
recording
mode.
In this case, the recording
sound will be monaural.
4,5,7,8
MULTI JOG
3,6
10
t
1 Insert a recordable
MD into the disc drive with
the label side up and in the direction of the arrow.
2 Press one of the function
buttons and prepare
the source to be recorded.
.
To record from a tape, press TAPE and insert a tape.
To record from the radio, press TUNER
BAND and tune in
to a station.
To record
from
a source
equipment
connected
to
DIGITAL
IN jack on the rear, press AUX/D-lN
repeatedly
until "D-IN" appears
on the display.
(Digital
recording)
o To record from a source equipment
connected
to VIDEO/
AUX jacks
on the rear, press AUX/D-lN
repeatedly
until
"AUX" appears
on the display.
(Analog
recording)
3 Press MODE three times.
"Ret
MODE?"
is displayed
for 10 seconds
4 Within 10 seconds, press ENTER and turn MULTI
JOG so that "Ret MONO?" is displayed.
5 Within 10 seconds,
press ENTER.
"MONO"
flashes
on the display.
6 Press MODE twice.
"Mark MODE?"
is displayed
for 10 seconds
8
9
Within 10 seconds,
press ENTER.
Press
MD REC.
The unit enters the standby
mode. Wait until the source name
to be recorded
is displayed.
10
11
Press 11 to start recording.
To record from a connected
equipment,
set the equipment
to playback
mode.
Press
to
stop recording.
When the recording
finishes,
"T6C
EDIT" is displayed
and
the data
concerning
the contents
of the
recording
are
registered.
To add index
marks
during recording
Press ENTER
at the desired
point during
recording.
To cancel
monaural
recording
Press MODE three times to display
"Ret
MODE?",
then within
10 seconds
press ENTER.
"RecSTEREO?"is
displayed.
Then
within 10 seconds
press ENTER. The flashing indication "MONO"
goes off.
Monaural
recording
is also canceled
by changing
the audio
source using a function button.
7 Within 10 seconds, press ENTER and turn MULTI
JOG to select an index mark mode.
To register
index
marks
automatically
at the beginning
of each track, select "Mark:AUTO?".
To register
index
marks
every
5 minutes,
select
"Mark: TIME?".
To register
without
index marks,
select "Mark:OFF?".
24
ENGLISH

Advertisement

loading