Editing The Configuration File - Motorola CS4070 Manual

1 - 8 CS4070 Scanner Product Reference Guide

Editing the Configuration File

Use a text editor such as Notepad to set configuration values in the
folder on the CS4070.
\Parameters
NOTE If you make errors while editing the Config.ini file, the file LOG.TXT is created in the \Parameters folder.
Consult this log file to determine the errors and make corrections.
Config.ini File Content
Table 1-1
Parameter
BarcodeFile
BarcodeDB
BTPin
BTName
BTProfile
BeepVolume
BeepTone
Mute
WakeUpBeep
Prefix
Suffix
Separator
DateFormat
Table 1-1 lists the programmable contents of the file.
Values
String In batch mode, the name of the batch file
containing bar codes scanned.
String Bar code database filename. If the file
exists scanned bar codes are checked
against its content. If the bar code exists
within the database, the scanner issues a
positive beep, if not a negative beep.
To engage this mode, create the
BarcodeDB.txt file on the CS4070. Note
that if this mode is engaged, no bar code
data is saved to the scanner.
String Default SPP PIN.
String Bluetooth device name (address) used
during discovery.
HID Selected BT profile.
SPP
Low Beeper volume.
Medium
High
Low Beeper tone/frequency.
Medium
High
On Mute the beeper.
Off
Enable Enable or disable the wake up beeper.
Disable
Character Prefix character.
Character Suffix character.
Character Separator character.
MM/DD/YY Date format for batch data. Set to enable
DD/MM/YY
date stamp
MM/DD/YYYY set the date.
DD/MM/YYYY
Enter no value to disable the date stamp,
for example: "
editable text file in the
Config.ini
Description
. See Set Date on page 3-5
"
DateFormat =
Default
BARCODES.TXT
DBASE.TXT
1234
CS4070:<serial
number>
HID
High
Medium
Off
Disable
<none>
0x0D (CR)
','
MM/DD/YY
to (Enable)