SMC Networks aPNEUALPHA2 Series Programming Manual page 67

Simple application controller

Table of Contents

PneuAlpha2 Simple Application

3 ) Time control action

Setup of the Flicker Function Block directly from the

1 ) Allocate the input pin to be used for the function block.

2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is

displayed as shown.

3 ) Press the "OK" key to set the Time unit for the delayed output.

4 ) Press the "OK" key having selected the value for the ﬂicker time unit and return to the func-

tion block edit screen. Using the "

key. The screen displayed is shown.

5 ) Select the On Time, Off Time or Period option using the "

"OK" key. The On Time can be entered using the "+" or "-" keys.

6 ) The OffTime can be entered using the "+" or "-" keys.

7 ) The Period can be entered using the "

PneuAlpha2 Series Controller

and

" keys highlight the Setup FB and press the "OK"

and

" Keys.

Function Blocks 6

and

" Keys and press the

6 - 19

Table of Contents

Need help?

Do you have a question about the aPNEUALPHA2 Series and is the answer not in the manual?