Table of Contents
Advertisement
α
PneuAlpha2 Simple Application
3.
System Menu
3.1
Menu Options Instructions
There are Systems Menus to help guide the user through the options available in the
α
PneuAlpha2. The TopMenu has a Run Mode that is accessed while the
operation or a Stop Mode that is accessed when the
The Edit Menu and the Function Block Edit Menu can be accessed when in either ProgEdit or
Monitor. These menus can be used to create and/or change programs steps or values.
Use the "OK" key to enter a programming option or to enter data into memory.
Set all the data on the screen before using the "OK" key to write the data to the system
memory. If there are multiple data screens in an option, enter the required data and accept
each screen with the "OK" key.
The "ESC" key will move the screen back to a higher menu option. It will cancel any data input
that has not been accepted with the "OK" key.
Note
Use the "ESC" key to exit the option to the higher menu; at times, it will be necessary to press
the "ESC" key a number of times to move to through multiple programming layers.
3.2
The Stop Mode
3.2.1
Top Menu
α
When the
PneuAlpha2 is first turned On, the Input/Output Image Table will appear. Press
the "OK" and "ESC" keys simultaneously to move to the TopMenu.
(If the TopMenu cannot be accessed the Menu Key has been set to "Not Use"),
•
Run:
Places the controller in Run mode.
•
Setup TS:
Provides a simple method to edit Time Switches from the Top Menu (only selectable if a
TSm function block has been chosen.)
•
ProgEdit:
Allows program editing/creation on the display using the front panel keys. The current
memory will be overwritten as changes are made to the program. Programs can be saved
on an ECC-PNAL2-EEPROM-2 memory cassette or in the ECC-PNAL-PCS/WIN-E soft-
ware Version 2.20 or above.
•
ClockSet:
Set the Real Time Clock or input a daily clock adjustment.
•
LANGUAGE:
Choose from 6 onscreen languages: English, German, French, Italian, Spanish, or
Swedish.
•
Others...
α
PneuAlpha2 is idle.
System Menu 3
α
PneuAlpha2 is in
3 - 1
Advertisement
Table of Contents
Need help?
Do you have a question about the aPNEUALPHA2 Series and is the answer not in the manual?