Subscribe to Our Youtube Channel
Related Manuals for SMC Networks AS 0 2F Series
Summary of Contents for SMC Networks AS 0 2F Series
- Page 1 Doc. no. AS*-OMO0058-A PRODUCT NAME SPEED CONTROLLER WITH ONE-TOUCH TUBE FITTING IN-LINE TYPE MODEL/ Series / Product Number ＡＳ＊０＊２Ｆ Ｓｅｒｉｅｓ...
- Page 2 Contents 2 ～ 3 1．Safety Instructions 4 ～ 6 2．Specific Product Precautions 3．Application 4．Specifications 5．Troubleshooting 6．Construction...
- Page 3 Speed Controller with One-Touch Tube Fitting In-Line Type / AS Series Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) , and other safety regulations.
- Page 4 Speed Controller with One-Touch Tube Fitting In-Line Type / AS Series Safety Instructions Caution The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary.
- Page 5 Installation 2. Specific Product Precautions Design/ Selection Warning (7) To adjust the speed, start with the needle in Warning the closed position, and then adjust by (1) Confirm the specifications. opening gradually. Do not operate at pressures or temperatures, When the needle valve is open, the actuator may etc., beyond the range of specifications, as this move suddenly.
- Page 6 Air Supply Operating environment Warning Warning (1) Type of fluids (1) Do not use in an environment where The operating fluid must be compressed air. corrosive gases, chemicals, sea water, water Contact SMC if using the product with other or steam are present. fluids.
- Page 7 Precautions for One-Touch Tube Fitting Mounting/ Piping Mounting/ Piping Caution Caution (1) Connection and disconnection of tube from (4) When using tubing from a manufacturer one-touch fitting other than SMC, be careful of the tolerance of ① Insertion of tube the tubing O.D.
- Page 8 3. Application This product is designed to control the speed of a pneumatic actuator. 4. Specifications Model AS1002F AS2002F AS2052F AS3002F AS4002F φ2 φ3.2,φ4,φ6 φ4,φ6 φ6,φ8 φ6,φ8,φ10,φ12 φ10,φ12 Metric Tube O.D. φ1/8",φ5/32,φ1/4 φ5/32",φ1/4" φ1/4",φ5/16" φ1/4",φ5/16",φ3/8" φ3/8",φ1/2" Inch Fruid Proof pressure 1.05MPa 1.5MPa Max.
- Page 9 6． Construction AS1002F, AS2002F, AS2052F AS1002F-02 AS3002F, AS4002F - 8 -...
- Page 10 Revision history A : Added the Safety Instructions sentences and Recommended Piping Conditions Table. 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021 JAPAN Tel: + 81 3 5207 8249 Fax: +81 3 5298 5362 https://www.smcworld.com Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. ©...
Need help?
Do you have a question about the AS 0 2F Series and is the answer not in the manual?
Questions and answers