Lcd Displays; Image Table; Lcd Function - SMC Networks aPNEUALPHA2 Series Programming Manual

Simple application controller

Table of Contents

PneuAlpha2 Simple Application

To Remove the "ProtectSW" Feature:

1 ) Install the ECC-PNAL2-EEPROM-2. Refer to the ECC-PNAL2-EEPROM-2 instruction

manual.

2 ) Select "Others" in the Top Menu.

3 ) Select "ProgTran."

4 ) Select "ProtectSW".

5 ) Choose "Off" to de-activate the feature.

3.7

LCD Displays

There are a number of types of data and/or information that can be displayed on the LCD

display besides the menus listed previously.

3.7.1

The ﬁrst LCD display to appear is the Input/Output image table and the Real Time Clock. The

clock shows the current time as Set by the User. The Summertime mode is shown by an "s"

preceding the time if activated.

3.7.2

Display up to 12 different letters or characters on each of four lines. Options include character

strings (design your own message), function block data, or analog data.

System Menu 3

3 - 17

Table of Contents

Do you have a question about the aPNEUALPHA2 Series and is the answer not in the manual?