Table of Contents
Advertisement
α
PneuAlpha2 Simple Application
3.6.5
Password
The password consists of four digits and will prohibit entry into the ProgEdit, Monitor, Disp
Pass and Serial Com modes only. All other menu options can be accessed when a Password
is used.
To Enter a Password:
1 ) Select "Other" Menu Option.
2 ) Select "Password" from the "Other" Menu Options
3 ) Use the "+" and "-" keys to enter the desired password.
4 ) Press the "OK" key to accept and activate the password.
5 ) A key symbol will now be displayed at the top of the
To Cancel a Password:
1 ) Select the "Other" Menu Option.
2 ) Select "Password" from the "Other" Menu Options. "Cancel Password" should appear on
the top of the screen.
3 ) Use the "+" and "-" keys to enter the current password.
4 ) Press the "OK" key to accept and deactivate the password.
5 ) The key symbol will be removed from the
Note 1: A Password protected program in an ECC-PNAL2-EEPROM-2 Cassette can be run
from and be downloaded into the main body of the controller.
Note 2: A controller containing a Password protected program can accept or transfer
programs to an ECC-PNAL2-EEPROM-2.
Note 3: The Password can also be set/deleted from the ECC-PNAL-PCS/WIN-E software or
deleted by the "PROGCLEAR" command.
3.6.6
Serial Com
The modem function capability of the
program upload/download. The communication must take place using the Visual Logic
Software (VLS) and the communication must be initiated accordingly. (The modem connected
α
to the
PneuAlpha2 is initialised upon the
command or specific conditions are not available).
Command - Enter the AT command for the modem to be connected to the controller.
Reference the Modem User manual for details on that unit's AT command. Choose the first
letter or symbol by using the ( ) and ( ) arrows. When the symbol is showing in the
command line, use the
symbols and accept the whole string with the "OK" key when finished inputting the data.
(There is no need to accept each letter with the "OK" key).
Delay - The Delay function sets the length of time the
Run mode before turning on the modem. Choose a value of 0 - 10 seconds using the "+" or "-
" keys. The modem connected to the Personal Computer with the VLS software must be set
ON prior to the
The GSM function allows a SMS (Short Message Service) message to be sent to either a
mobile telephone or an email account. The SMS provides the remote user with the identical
LCD screen's data. Refer to the
tion concerning GSM parameters.
) and
) arrows to move to adjoining spaces. Enter up to 64 letters/
(
(
α
PneuAlpha2 modem turning on.
α
PneuAlpha2 Communication Manual for detailed explana-
α
PneuAlpha2 display.
α
PneuAlpha2 display.
α
PneuAlpha2 allows remote monitoring via a PC and
α
PneuAlpha2 start-up. Dialing options from a
α
PneuAlpha2 will wait after entering the
System Menu 3
3 - 15
Advertisement
Table of Contents
Need help?
Do you have a question about the aPNEUALPHA2 Series and is the answer not in the manual?