SMC Networks aPNEUALPHA2 Series Programming Manual page 10

α
Series Applications Controller
PneuAlpha2
7. Lets Make a Program ................................................................ 7-1
7.1 Option Settings ..................................................................................... 7-1
7.2 The Function Block Diagram ................................................................. 7-1
7.3 Input the Program ................................................................................. 7-2
7.3.1 Adding Function Blocks by the Left to Right method (Section 4.2.1) 7-2
7.3.2 Scroll through the Function Blocks by Number (Section 4.6.1) ... 7-3
7.3.3 Use the Jump Command (Section 4.6.3) ..................................... 7-3
7.3.4 Use the NewFB command ........................................................... 7-4
7.3.5 Connect the Function Blocks from Right to Left (Section 4.2.2) .. 7-4
7.4 Set up the Function Block Parameters (Section 4.5.1) ......................... 7-5
7.5 Exit the Function Block Diagram board ................................................. 7-6
8. Appendix ................................................................................... 8-1
8.1 Associated Manuals .............................................................................. 8-1
8.2 System Keys ......................................................................................... 8-2
8.3 System Bits ........................................................................................... 8-2
8.4 Boolean Gates ...................................................................................... 8-3
8.5 Function Blocks ..................................................................................... 8-4
viii