Safety; Symbols Used; Warnings - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Safety

1.
1.1
System operation assumes knowledge of the operating instructions.
The following symbols are used in these operating instructions:
i
Measurement
1.2
Connect the power supply and the display/output device according to the safety regulations for electrical
CAUTION
equipment.
> Risk of injury
> Damage to or destruction of the controller or the measuring system
The supply voltage must not exceed the specified limits.
> Risk of injury
> Damage to or destruction of the controller or the measuring system
Avoid shocks and impacts to the controller or the sensor or the measuring system. Damage to or destruction
NOTICE
of the controller or the measuring system.
Never fold the sensor (optical fiber) and do not bend it in tight radii.
> Damage to or destruction of the sensor, partial failure of the measuring system
Protect the ends of the sensor against contamination (use protective caps).
> Failure of the test instrument
colorSENSOR CFO
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moderate
CAUTION
injury.
NOTICE
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.
Indicates hardware or a software button/menu.

Warnings

Page 7