Cfs Sensor - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Installation and Assembly
4.5
Fig. 18 Sensor connection on the controller
i
Keep the end surfaces of the sensor free of dust, avoid any damage or soiling, e.g. by touching. This also ap-
NOTICE
plies to the plug connectors at the controller.
> Error-free recognition of colors no longer guaranteed
> Erroneous measurements
> Damage to sensor
i
colorSENSOR CFO

CFS Sensor

Plug the sensor (optical fiber) into the sensor socket (CFS or FA connector) on the controller.
The coding on the sensor connector (CFS or FA) is on the side of the illumination LED.
For this reason clean soiled end surfaces with pure alcohol and a clean, lint-free microfiber cloth.
Fig. 19 Mounting of sensor (optical fiber)
Page 37