Deleting Color Table - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
5.3.5
When switching to a new recognition task, it is recommended to delete the color table completely.
colorSENSOR CFO

Deleting Color Table

Output LEDs 1 - 8 are flashing.
INT
TEACH
AUTO
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8
Save:
INT
TEACH
AUTO
Output LEDs 1 - 8 output the set output configuration signal for No color rec-
ognized. By default, 3 output LEDs are illuminated with the CFO100, 8 output
CLR OPT
LEDs with the CFO200.
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
Quit:
TOL
CLASSIFY 5
SPHERE 6
CYLINDER 7
BOX 8
Press the CLR key for longer than 2 sec. to delete the color table completely.
Press the ENTER key for longer than 2 sec. to confirm deletion of all colors.
Press the ESC key for more than 2 sec. to cancel the deletion of all colors
and return to the operating mode without saving. The output LEDs indi-
cate either the recognition group or the output configuration for No color
recognized, depending on the color detected.
Page 54