Safety; Symbols Used; Warnings - MICRO-EPSILON colorCONTROL MFA-5 Instruction Manual

Safety

1.
The handling of the system assumes knowledge of the instruction manual.
1.1
The following symbols are used in this instruction manual:
i
1.2
Connect the power supply and the display / output device in accordance with the safety regulations for elec-
CAUTION
trical equipment.
> Danger of injury
> Damage to or destruction of the sensor
The power supply must not exceed the specified limits.
> Danger of injury
> Damage to or destruction of the sensor
Avoid shock and vibration to the sensor.
NOTICE
> Damage to or destruction of the sensor
Never kink the fiber optics and do not bend tightly.
> Damage to or destruction of the fiber optics; partial failure of the sensor.
Protect the ends of the fiber optics from dirt and contamination (use protective caps).
> Failure of the testing device
colorCONTROL MFA-5
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moder-
CAUTION
ate injuries.
Indicates a situation which, if not avoided, may lead to property damage.
NOTICE
Indicates a user action.
Indicates a user tip.

Warnings

Page 7