MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual page 107

Operation
Automatic modulation
Delete learned colors
Delete learned color groups and
colors
Fig. 51 Differentiated list of functions
Trigger Type Selection
Level:
H
L
Low level
High level
When the state changes from Low to High or from High to Low, signal edges occur. These are meaningfully
referred to as positive or negative edge-triggered.
Rising edge
Falling edge
Fields with gray
background re-
quire a selection.
Fields with dark
Val-
border require
ue
entry of a value.
colorSENSOR CFO
Here , see
measurement frequency and the detector modulation.
This function deletes all learned colors in all color groups. However, the
color groups remain.
This function deletes the complete color table.
High (H; 1) or Low (L; 0)
Change of state between L (< V
stored function is executed.
Change of state between H (> V
stored function is executed.
5.6.3.3, the controller settings are adjusted depending on the
Meaning
State is present at the input for a longer period.
High, is live and logical 1
Low, logical 0
As long as a low level < V
+
stored function is executed.
As long as a high level > V+/2 ±5 % (max. 30 V) is present at
the input, the stored function is executed.
/2 ±5 %) to H (> V /2 ±5 %). During this change, the
+ +
/2 ±5 %) to L (< V /2 ±5 %). During this change, the
+ +
/2 ±5 % is present at the input, the
Page 107