Safety; Symbols Used; Warnings - MICRO-EPSILON induSENSOR MSC7401 Operating Instructions Manual
Hide thumbs
Also See for induSENSOR MSC7401:
- Operating instructions manual (58 pages) ,
- Operating instructions manual (102 pages)
Table of Contents
Advertisement
Safety
1.
Sensor operation assumes knowledge of the operating instructions.
1.1
The following symbols are used in these operating instructions:
i
Measurement
1.2
Connect the power supply and the display/output device according to the safety regulations for electrical
equipment.
> Risk of injury
> Damage to or destruction of the controller and/or the sensor
Avoid shocks and impacts to the sensor and controller.
> Damage to or destruction of the controller and/or the sensor
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the controller and/or the sensor
MSC7401 / 7802 / 7602 Miniature sensor controller for inductive displacement sensors
Safety
Symbols Used
Indicates a hazardous situation which, if not avoided, may result in minor or moderate
injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.
Indicates hardware or a software button/menu.
Warnings
Page 7
Advertisement
Table of Contents
Need help?
Do you have a question about the induSENSOR MSC7401 and is the answer not in the manual?
Questions and answers