MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual page 109

Operation
Fig. 54 Trigger setting Extended 1
In the Reprensentation > Default setting, only one function can be selected per trigger signal,
In the Representation > Extended setting, multiple assignments of functions to a trigger action are possible. These are then car-
ried out in the order shown from top to bottom.
i
If you have difficulties parameterizing the outputs, you can contact customer
see 5.7. This resets the controller to factory defaults.
All combinations can be reset using the Reset
colorSENSOR CFO
Fig. 55 Trigger setting Extended 2
function, see 5.7.
see Fig. 54.
support, see Fig. 8, or perform a hardware reset,
Page 109