Ethernet Settings - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
5.6.8.3
An IPv4 connection is the Internet Protocol standard or IP standard. IPv4 stands for Internet Protocol version
four. Here, the address is structured as a 12-digit number separated by dots. For sensors from MICRO-EPSI-
LON the default IP address is
Here you can change the IPv4 settings of the controller.
i
Fig. 69 Window Ethernet settings IPv4
colorSENSOR CFO

Ethernet Settings

Go to the menu Settings > System settings > Ethernet settings IPv4.
169.254.168.150, see Fig.
After changing the IP address, you may also have to adjust the address space of the PC you are using
to re-establish a connection to the sensor.
69.
Page 120