Access Via Ethernet (Connection Establishment) - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
5.4.2

Access via Ethernet (Connection Establishment)

Direct connection to PC, controller with static IP (factory setting)
PC with DHCP
Connect the controller to a PC using a direct Ethernet connection (LAN) 2.
For this purpose, use the CAB-M12-4P-St-ge;Xm-PUR-Cat5e;RJ45-Eth
Connect via sensorTOOL
Wait until Windows has estab-
lished a network connection
(connection with limited connec-
tivity).
Start the sensorTOOL
see 5.4.1.
Click the button. Now
select the desired controller from
the list.
Click on the Start Browser
button to connect the controller
to your standard browser.
Interactive web pages for controller and peripherals settings now appear in the web browser.
1) This assumes that the LAN connection on the PC uses the following IP address, for example: 169.254.168.1.
2) Some Ethernet modules in the PC may cause long waiting times when establishing a connection. To avoid this, we recommend us-
ing a Belkin Ethernet to USB 3.0 adapter
colorSENSOR CFO
PC with static IP
Start the sensorTOOL
5.4.1.
Click the
desired controller from the list.
program,
Click on the Start Browser button to
connect the controller to your standard
browser.
To change address settings, click on the
Change IP Address button.
• Address type: static IP address
• IP address: 169.254.168.150
• Subnet mask: 255.255.0.0
Click on the Change button to transmit
the changes to the controller.
Click on the Start Browser button to
connect the controller to your standard
browser.
cable, see A 1.
program, see
button. Now select the
1
Connect via web browser
Start a web browser.
Click the task bar and enter the static IP
address for the controller.
In the delivery state, this is 169.254.168.150.
Address type: static IP-Address
• IP address: 169.254.168.150
• Subnet mask:
You can customize this IP address in the
Settings > System settings > Eth-
ernet settings web page.
i
After changing the IP address, please
make a note of the new IP address in
order to find the controller again later
on.
1
Page 68