Reset Sensor - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
5.6.8.7
Here you can reset the colorSENSOR CFO to the factory settings or restart it.
Fig. 79 Reset sensor
Clicking Factory defaults overwrites the currently used settings with the factory settings, including all
changes related to the detection profile, color table, interface configuration. You can find the factory defaults
in the
i
Previous firmware updates are retained. If these are also to be reset, you must proceed as described in the
chapter Factory
Clicking Reboot restarts the colorSENSOR CFO. This may take a few minutes.
i
colorSENSOR CFO

Reset Sensor

Go to the menu Settings > System settings > Reset sensor.
appendix, see A 2.
After resetting, the controller is assigned a fixed IP . Communication with the web interface may need to
be re-established.
Reset, see 5.7.
After a firmware update, the computer restarts automatically.
Page 131