Tolerance Mode - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
5.3.7.4
Changing the tolerance mode is useful if your application requires specific color
colorSENSOR CFO
INT
TEACH
AUTO
The LED flashes rapidly (1900/100 ms) to signal that the multi-teach mode is
activated.
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8

Tolerance Mode

INT
TEACH
AUTO
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8
Press the TEACH key for less than 2 sec. to switch over to the multiple teach
mode.
Press the key for less than 2 sec. to switch to the next option group.
tolerances, see 2.4.
Page 63