Usb - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Installation and Assembly
4.4.4
Via the USB interface, the same protocol is output as via the RS232 interface, described in the Interface
Instructions, see A
software is provided for parameter setting via a PC using a USB interface.
The cable shield is connected to the housing.
All GND conductors are interconnected with one another and to the supply voltage ground.
Use a shielded cable with a length of max. 5 m.
Micro-Epsilon recommends the optionally available CAB-M12-5P-St-ge
Pin Color
1
2
3
4
5
Fig. 15 USB connector
1) Applies only for colorSENSOR CFO200/CFO250
colorSENSOR CFO

USB

3. Just like the RS232 interface, it acts as process interface. This means that no special
Connect the cable shield to the evaluation unit.
Function
Brown USB-VDD
White USB Data-
Black USB Data+
Blue NC (USB-ID) USB (host or client)
Green/yellow USB-GND
Description
USB (host or client)
USB (host or client)
USB (host or client)
View of con-
USB (host or client)
troller flange
cable, see A 1
2
5
1 4
Pin sequence, 5-pin
cable connector,
socket
view of solder side
3
Page 32