Color Display - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
The following symbols and functions are available in the Home, Settings and Measurement menus.
5.5.2
On the left side is the display of the color and the color values currently detected by the sensor. If the color
has already been saved in the color table and if it is within the set tolerance values, the corresponding color
group and the relative distance ∆E
In addition, the output from the set output configuration is available at 3 or 8 outputs. Here 1 corresponds
to OUT0 and 8 to OUT7 on the SYS
LOW, white is displayed and when switched to HIGH, green is displayed.
Fig. 28 Color display window
colorSENSOR CFO
Measurement is active
Measurement stopped
Stop measurement
Start measurement
Save measurement results

Color Display

are also output.
rel
connector, see 4.4.1 and the I/O socket. When the output is switched to
Page 72