Teaching And Editing Colors - MICRO-EPSILON colorSENSOR CFO Series Operating Instructions Manual

Operation
5.6.5.2
New colors can be taught and added to the corresponding color group memory. Individual colors, entire
color groups or the entire color table can be changed and
If the color table is still empty, create a new color group
The
The
name, a tolerance model with custom tolerance values, the output configuration and the hold time for the
switching outputs.
i
colorSENSOR CFO

Teaching and Editing Colors

Go to Settings > Color table >
button can be used to add further individual colors to the color group.
button allows you to make custom settings for each color group. These settings include a custom
Teaching colors
Edit
Delete
Apply
Cancel
Before creating a new color table, set the parameters for the color space and controller modulation, see
Settings > Detection profile
If you subsequently change the controller modulation, all colors must be learned again.
Teach color and/or
deleted, see 5.3.5, see 5.6.5.3
, see 5.6.5.1
Teaches current color (1) and adds it to the corresponding color
group memory, see Fig. 47.
Allows editing and setting the color group (2). The settings of a color
group can be changed, such as Name (13), Distance model (12),
tolerance size, Hold time (8) of the output signal, output configura-
tion.
The name may be a maximum of 64 characters long and contain
only alphanumeric characters (a-z, A-Z, 0-9, no umlauts), spaces
and the special characters
Deletes a color group (3) or color
Applies the current entry (5), see Fig. 47.
Discards the current entry without saving
menu, see 5.5.3.
Edit.
(Delete color table).
(Add color group).
+-#,.(), see Fig. 47.
(4), see Fig. 47.
(6), see Fig. 47.
Page 98