Cable List; Velocity - BIRD BirdTechnologies SignalHawk SH-36S Operating Instructions Manual

Cable List

Select a specific cable from a list.
Note: Custom cables can be added to the list. See "Customizing Sig-
nalHawk Content" on page 129.
Figure 34 Example, Distance-to-Fault - Cable Setting - Cable List

Velocity

Sets the speed of the signal going through the cable being measured.
Note: Changing this setting cancels any selection on the Cable List
and changes that setting to "None."
Figure 35 Example, Distance-to-Fault - Cable Setting - Velocity
Settings
Setting
49