Out-Of-Band And In-Band, Out-Of-Channel Spurious - BIRD BirdTechnologies SignalHawk SH-36S Operating Instructions Manual

Out-of-Band and In-Band, Out-of-Channel Spurious

Note: These two measurement methods are not listed on the inter-
face.
Out-of-Band & In-Band, Out-of-Channel Spurious measures the
distortion and interference inside or outside a system band.
1. Press the Mark & Limit key.
2. Press the Select Marker: 1 2 3 4 5 6 soft key to select marker 1.
Note: The bracketed number indicates the active marker.
3. Press the Marker: On/Off soft key.
4. Move the marker over one of the spurs using the arrow keys, the keypad or
thumbwheel.
5. Compare the value of the marker to the specified allowable level of Out-of-
Band or In-Band, Out-of-Channel spurious emissions for the corresponding
channel transmit frequency.
96