Installation Method - Omron SJDE-ANA-OY Manual

2.2 Installation Method

2.2 Installation Method
Installation Method and Direction
• Install the SERVOPACK perpendicular to the wall.
• Connect the mounting holes securely to the mounting surface with M4 screws.
SJDE-08ANA-OY: Three mounting holes
SERVOPACK installation plate
Space between SERVOPACK Units
• Be sure to keep a space between adjacent SERVOPACK units as shown the following figure if they
are mounted inside the control panel. This allows the units to cool.
• Do not cover the inlet or outlet parts of the SERVOPACK and prevent any foreign objects, such as
metallic fragment, or combustibles from entering the product.
Failure to observe this caution may cause internal elements to deteriorate resulting in malfunction
or fire.
M4 screw
M4 screw
M4 screw
CAUTION
30 mm 10 mm
min. min.
18
SJDE-01 to 04ANA-OY: Two mounting holes
SERVOPACK installation plate
50 mm
Air outlet
min.
direction
50 mm Air inlet
min. direction
M4 screw
M4 screw