Latching Area - Omron SJDE-ANA-OY Manual

6.7 Latching Area

The latching area can be specified by setting the parameters listed below.
The setting will be immediately written to the SERVOPACK.
Parameter Name
No.
Pn820 Latching area
upper limit
Pn822 Latching area
lower limit
1. When Pn820 > Pn822
The latching area is between the latching area lower limit and latching area upper limit including the
set value.
2. When Pn820 Pn822
The latching area is the latching area lower limit or above, or the latching area upper limit or below.
Latching area
Data Size
4 bytes -2147483648
4 bytes -2147483648
Pn822
Latching area
Pn820
Min. Max.
Set Value Set Value
2147483647
2147483647
127
6.7 Latching Area
Units
Reference unit
Reference unit
Pn820
Pn822
Latching area
Factory
Setting
0
0