Inspections; Regular Inspections; Part's Life Expectancy - Omron SJDE-ANA-OY Manual

9.1 Regular Inspections

9 Inspections

9.1 Regular Inspections
For inspection and maintenance of the SERVOPACK, follow the inspection procedures in the following
table at least once every year. Other routine inspections are not required.
Item
Exterior
Loose Screws

9.2 Part's Life Expectancy

The following electric or electrical parts are subject to mechanical wear or deterioration over time.
If an unusual noise or vibration occurs, refer to the life expectancy table and contact your Omron
Yaskawa representative. After examining the part in question, we will determine whether the parts
should be replaced or not. When the part has expired before the expected time, further inspection will
be required.
Part
Cooling Fan
Note: 1. The life expectancy listed in the table is a reference period that may be affected
by the environmental and operating conditions.
2. The recommended models of the replacement cooling fans are:
SERVOPACK
SJDE-04ANA-OY
SJDE-08ANA-OY
Frequency
At least once a year Check for dust, dirt, and oil on
the surfaces.
Check for loose connector
screws.
Life Expectancy
30,000 hours Life depends on operation conditions. Check that there is no
unusual noise or vibration when inspecting.
Model
JZSP-CHF08-1 SUN-WA TECHNOS
CORPORATION
JZSP-CHF08-2
Procedure
Comments
Manufacturer
156
Comments
Clean with cloth or com-
pressed air.
Tighten any loose screws.