Table of Contents
Advertisement
Creating Fixed Displays
4-3-5
Creating Polygons
Procedure 1. Select "FIX DSP" from the initial editing menu.
88
This is the procedure for drawing polygons. It is possible to create polygons with
up to 255 sides.
It cannot be used with the NT20S, NT20M, NT600S, or NT600M.
The fixed display menu will be displayed.
2. Select "POLYGON" from the fixed display menu.
3. Select the display attribute with "Detail".
The selectable options are "normal", "inverted", "flashing" and "spot".
4. If using an NT30C or NT610C, specify the line color.
5. Press the
key with the cursor on "Exec"
6. Draw the polygon.
1) Press the
key at the start point.
2) Locate the cursor at a the next vertex and press the
Set as many vertices as required.
3) At the final vertex, press the
double click if using the mouse).
The final vertex will be joined to the start point automatically.
Automatically joined
End point
(Shift+
)
Pressing the [Esc] key before the end point has been set deletes the last drawn
"
straight line.
Pressing the [Esc] key while holding down the [Shift] key aborts the drawing.
"
7. Press the [Esc] key to quit polygon drawing.
key while holding down the [Shift] key (or
Start point
(
)
Vertices
Section 4-3
key.
(
)
Advertisement
Table of Contents
