Table of Contents
Advertisement
Creating Fixed Displays
Deleting Tiling
Procedure 1. Select "TILING" from the fixed display menu and then press the [F1] (Delete)
Modifying Tilings
Procedure 1. Select "TILING" from the fixed display menu, then press the [F2] (Modify) key.
key.
A j mark will be displayed at the point at which the tiling was specified.
2. Locate the cursor at the j mark of the tiling to be deleted and press the
key.
3. Check the message and then press the
To abort deletion, press the [Esc] key.
A j mark will be displayed at the point where the tiling was specified.
It is also possible to proceed straight to step 3. by left clicking on the tiling to be
"
modified (see p.57).
2. Locate the cursor at the j mark of the tiling to be modified and press the
key.
3. Select the required item and execute the modification.
S Detail:
Select to change the tiling pattern.
S Color:
If using an NT30C or NT610C, select to change the color.
S Display position:
Select to change the tiling location.
4. Press the [Esc] key to quit modification.
Section 4-3
key; the tiling will be deleted.
95
Advertisement
Table of Contents
